Marine and Cargo Survey
Pacific Blu Subsea Services
We, Pacific Blu Subsea Services, are fully committed to provide a complete and comprehensive range of high-quality Ship Husbandry, Underwater Diving, Marine and Offshore Services.
Marine and Cargo Services
Initial, Intermediate and Final Draft Survey
Record drafts on all six locations, measurement of liquids on board (Fuel oil, Diesel oil, Ballast water and Fresh water) of individual tanks. Calculate the quantity on basis of tank calibration data and ship’s trim and stability data, determine quantity Discharged /loaded onboard.
Bunker Surveys / Bunker Supply / R.O.B Survey
Note the drafts at four locations, forward and aft for the trim calculations. To record the soundings and temperatures of the individual tanks. To calculate the quantity of FO / DO basis the ship’s trim / stability data and density provided.
Ascertain the exact quantity of bunkers onboard at the time of on hire & off hire, before and after supply of the bunkers.
Condition Survey
Inspecting vessel's condition at the time of On-Hire / Off-hire. Issuing a detailed hull condition report with photographs.
Hatch Sealing and Unsealing Survey
Prior commencement of Discharge inspect seals on hatch covers and After completion of Loading seal the hatch covers with numbered seals and issue the Hatch Sealing Certificates.
Hose Test & Hatch Covers Survey
Prior commencement of Loading carried out Hose test on hatch covers and Cross Joints and a visual inspection of the hatch covers/ hatch packing.
Crane Performance Survey
Visual inspection of the cranes, loose gear, crane cabin, machinery spaces, runner and luffing wires, etc. To record the timings for 5 cycles and determine the average crane cycle time.
Crane Out Reach Survey
To inspect the cranes. To carry out physical measurements to obtain distance of the crane center to clear wharf to enable us safe discharge / loading.
Hold/ Hatch Fitness Survey
Prior commencement of Loading carried out Hose test on hatch covers and Cross Joints and a visual inspection of the hatch covers/ hatch packing.
Dead Freight Survey
To ascertain the quantity of cargo loaded onboard by recording the drafts and measurement of liquids on board, in the individual tanks, to calculate the quantity basis the tank calibration data and the ship’s trim and stability data. Compare the quantity onboard with the quantity declared by shipper/ Charterers.
Loss minimization survey
Carried out at the time of Loading, Discharge and Dispatch Operations, for loss minimization.
Grab Survey
Inspect condition of grabs. Opening / Closing method and measurement of the grabs.
Tanker Survey for Imports / Exports Oils, Chemicals & Petroleum Products
1. Ullaging & Calculations to ascertain cargo quantity.
2. Sampling and Analysis if required.
3. Tanks Cleanliness inspection prior to loading and Tank inspection after discharge of the cargo.
4. R.O.B. Survey.
5. Continuous attendance on board monitoring discharge / loading / transfer operation.
Bagged cargo
We have been handling bagged cargoes such as Maize, Sugar, Rice, Bentonite, Etc and have carried out precautionary surveys / loss minimization surveys.
Cargo Condition and Continuous supervision
Ascertaining the condition of cargo prior to loading and during loading operations. Assist the Master as required and suggest remarks for clausing the Mate Receipts / Bill of Lading. Preparing daily / detailed final reports.
We also carry out [Silver nitrate test] Test of chlorides.
Cargo: Project Cargoes/HRC / CRC / H-Beams / I-Beams / Plates / Bare pipes / Coated pipes/casing pipe/ Timber Logs, etc
Loading
1. Preloading condition and tally of cargo.
2. Measurement of cargo.
3. Tally/condition of cargo during loading.
4. Lashing/securing of cargo onboard the vessel
Discharge
1. Inspection of cargo inside the vessel Holds.
2. Tally/condition of cargo during discharging.
Delivery
1. Tally/condition of cargo during delivery.
Container Services
Container Surveys
Attendance during container stuffing and de-stuffing / sealing and record the container condition. Preparing detailed reports about the cargo condition.
Measurement of cargo
Measurement of the cargo, Calculate / Ascertain the volume of the cargo, Prepare detailed reports.
CFS Survey
Survey of Import/Export - FCL / LCL containers, bonded cargo in the CFS and preparing reports.
Car Carrier loading Survey
1. Pre-shipment inspection of the vehicles at LPR.
2. Tally during the course of loading operations.
3. Inspect the lashings of the vehicles loaded.
4. Prepare the final stowage plan.
Weigh bridge – Supervision Survey
Prior to commencement of weigh-ment, inspect weighbridge certificates issued by the concerned authority. Verify with manual weight and check few trucks on other weighbridge. Post the surveyors shift wise / round the clock and prepare weigh-ment reports.
Warehouse Inspection
Inspect to warehouse prior to storage and unloading / loading and delivery of cargo, superintendence and consultation, preparing detailed reports. Date/ Shift wise measurement of the warehouse and certify suitable for nominated cargo.